Ir-Fusion - Fluke Ti105 User Manual

Ti100, Ti105, Ti110, Ti125, TiR105, TiR110, TiR125
Users Manual
10. Push:
 to set the change and go back to the live view.
 or  to set the change and go back to the previous menu.
 to cancel the change and go back to the live view.
®

IR-Fusion

®
IR-Fusion makes it easier to understand infrared images through the use of an
aligned visible image and infrared image. The Imager automatically captures a
visible image with every infrared image to show you exactly what you see and
then allows you to more effectively show it to others.
IR-Fusion has different modes that vary by model, see Table 7. Full Visible
mode is also available. (The Fluke Ti100 does not have IR-Fusion and can
only display a full infrared image.)
Table 7. Infrared and IR-Fusion Modes by Model
Full IR
PIP IR
Full AutoBlend (min, mid, max)
Full Visible
PIP (picture-in-picture)
AutoBlend (min, mid, max)
[1] Ti105 and TiR105 PIP mode from 1.2 m to 4.6 m (4 ft to 15 ft).
To set the IR-Fusion mode:
1. Push .
2. Push / to highlight Measurement.
3. Push  or  to view the menu.
4. Push / to highlight Image.
5. Push  or  to view the menu.
6. Push / to highlight IR-Fusion.
7. Push  or  to view the menu.
30
[1] [1]