Laser Pointer - Fluke Ti105 User Manual

Ti100, Ti105, Ti110, Ti125, TiR105, TiR110, TiR125
Users Manual

Laser Pointer

The laser pointer is a sighting aid and is offset from the infrared camera. As a
result, it may not always represent the exact center of the infrared or visible
image.
The laser dot does not appear on an infrared-only image, but does on visible-
only or AutoBlend images. The laser dot cannot be seen in the visible channel
of the IR-Fusion image if obscured by the center point marker graphic.
The laser pointer selections are Trigger Laser, Trigger Torch, and Laser/Torch.
When set, pull the secondary trigger to turn on, release the secondary trigger to
turn off.
To prevent eye damage and personal injury, do not look into
the laser. Do not point laser directly at persons or animals or
indirectly off reflective surfaces.
To set:
1. Push .
2. Push / to highlight Camera.
3. Push  or  to view the menu.
4. Push / to highlight Laser/Torch.
5. Push  or  to view the menu.
6. Push / to highlight an option.
7. Push  to set the option.
8. Push:
 to set the change and go back to the live view.
 or  to set the change and go back to the previous menu.
 to cancel the change and go back to the live view.
The laser warning symbol () shows in the Header zone of the display when
the laser is turned on and you pull the secondary trigger.
36
 Warning