General Specifications - Fluke Ti105 User Manual

Ti100, Ti105, Ti110, Ti125, TiR105, TiR110, TiR125
Users Manual
To get the best performance from the lithium-ion battery, use the guidelines
that follow:
Do not store the Imager on the charger for more than 24 hours as reduced
battery life may result.
Charge the Imager for a two-hour minimum at six-month intervals for
maximum battery life. Without use, the battery will self-discharge in
approximately six months. Batteries stored for long periods will need two
to ten charging cycles for full capacity.
Always operate in the specified temperature range.
Do not incinerate the Product and/or battery. Go to Fluke's
website for recycling information.

General Specifications

Temperature
Operating ............................................................ -10 C to 50 C (14 F to 122 F)
Storage ................................................................ -20 C to 50 C (-4 F to 122 F)
Charging .............................................................. 0 C to 40 C (32 F to 104 F)
Relative Humidity .................................................. 10 to 95 % non-condensing
Altitude
Operating ............................................................. 2,000 m
Storage ................................................................ 12,000 m
Safety Standards
CE Directive ........................................................ IEC/EN 61010-1 2nd Edition Pollution
Display .................................................................... Color LCD, 3.5 diagonal (Portrait
Controls and Adjustments
User-selectable Temperature Scale ( C/ F)
Center Point Temperature
Language Selection
Time and Date Settings
Emissivity Selection
Background (reflected) Compensation
Transmission Correction (all models except Ti100, Ti105, TiR105)
®
IR-Fusion (all models except Ti100)
Color Palettes
Level and Span
User-selectable Display Graphics
46
  Caution
without batteries
Degree 2
orientation) with Backlight (selectable
high, medium, low)