®
IR-Fusion
Technology
®
IR-Fusion
technology makes it easier to understand,
analyze, and communicate infrared images through the
use of an aligned visible image and infrared image. The
Imager automatically captures a visible image with every
infrared image to show you precisely where a potential
problem might be, and then allows you to more effectively
communicate it to others.
®
IR-Fusion
technology has different modes:
Icon
TiX520
-Picture-in-Picture (PIP)
-AutoBlend
(min, mid, max)
Full Screen AutoBlend
(min, mid, max)
Visible
The visible image and infrared image can be
customized or separated in SmartView and
SmartView Mobile Software when you use the .is2
file format.
TiX560
Picture-in-Picture (PIP)
Full Screen IR
NA
Note
®
To set the IR-Fusion
technology mode:
1. Go to Measurement > Image > IR-Fusion.
2. Push
/
to highlight an option.
3. Push to set the new option.
TiX560
The TiX560 model has an adjustable IR Level.
Push
to open the scroll bar that adjusts the
IR-Fusion mode. Use it to infinitely adjust the picture from
Full IR mode to Full Visible mode.
Color Alarms
The Imager has various apparent temperature color
alarms. The high-temperature color alarm shows a full
visible image and only shows infrared information on
objects or areas that are above the set apparent
temperature alarm level. The low-temperature (or dew
point) color alarm shows a full visible image and only
shows infrared information on objects or areas that are
below the set apparent temperature (or set dew point)
color alarm level. The user must manually determine and
set these parameters.
Expert Series Thermal Imager
Menus
27