Timer And Sleep Operation - Sharp AN-PR1000H Operation Manual

Timer and sleep operation (continued)
AN-PR1000H
ENGLISH
When the timer setting is completed:
The unit is in the timer playback
stand-by mode.
When the start time is reached:
Unit starts automatically and the volume
increases gradually.
The unit is operated by the timer.
When the finish time is reached:
The unit is set to the power stand-by mode automatically.
E-33
After completing the setting
TIMER
Timer play indicator flashes
The timer setting is cancelled.
To check the timer setting:
1 Whilst in the timer playback stand-by mode, press the SHIFT and TIMER buttons.
2 Within 10 seconds, hold down the SHIFT button and press the
select "TIMER CAL", and press the ENTER button.
The unit returns to the timer playback stand-by mode after the setting contents
are displayed in order.
Cancelling the timer playback:
Timer playback is cancelled by turning the power on whilst in the timer playback
stand-by mode. The same operation can be performed in the following procedure
without turning the power on.
1 Press the SHIFT and TIMER buttons.
"TIMER OFF" will appear.
2 Within 10 seconds, press the SHIFT and ENTER buttons. Timer playback will
be cancelled ( the contents of the setting will not be cancelled.)
Reusing the timer:
Using the same setting;
The timer setting will be memorised once it is entered. To reuse the same setting,
perform the following operations.
1 Turn the power on and press the SHIFT and TIMER buttons.
"TIMER STANDBY" will appear. If it does not appear, set the unit to the correct
time.
2 Within 10 seconds, press the SHIFT and ENTER buttons.
After the setting contents are displayed in order, the unit is set to the timer
playback stand-by mode.
Changing the setting;
Turn the power on, and repeat the operation from step 1 in "Setting the timer"
(page 31).
or button to