Falling Prevention - Sharp AN-PR1000H Operation Manual

Falling prevention

Safety wires are useful to prevent the TV from falling off in case of earthquake occurance.
Pull out the rubber
blocker located
behind the TV.
There is a small hole to
fix the screw in.
1
Fix the washer and screws behind the TV.
Hang the safety wire on the screw,
2
between the washer and the TV.
Tighten the screw in.
At the back of the rack unit,
3
fix in the washer and the
screw.
Put the safety wire around
4
the screw and washer. Tighten
the screw in.
Loosen the wing nut and pull
the safety wire until it is
stretched properly. Tighten
back the wing nut.
Ensure all the screws have
5
been fixed properly.
Ensure all the wing nuts
6
have been fixed properly.
Screw
Washer
Safety wire
Washer
Screw
Wing nut
AN-PR1000H
ENGLISH
E-12