Sharp AN-PR1000H Operation Manual page 33

Memorising a station
You can store 40 FM stations in memory and recall them at the push of a button. (Pre-
set tuning)
1
Perform steps 1 - 3 in "Tuning" on page 25.
2
Hold down the SHIFT button and press the ENTER button to enter
the preset tuning saving mode.
3
Within 5 seconds, press the SHIFT and PRESET (
to select the preset channel number.
Store the stations in memory, in order, starting with preset channel 1.
4
Within 5 seconds, press the SHIFT and ENTER buttons to store
that station in memory.
If the "MEMORY" and preset number indicators disappear before the station is
memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a preset
station.
When a new station is stored in memory, the station previously memorised will
be erased.
Note:
The backup function protects the memorised stations for a few hours should there be
a power failure or the AC power lead become disconnected.
To recall a memorised station
Hold down the SHIFT button and press the PRESET (
0.5 seconds to select the desired station.
To erase entire preset memory
1 Hold the CLEAR button down for 4 seconds or more.
2 Whilst "CLEAR" is flashing, press the SHIFT and ENTER button.
or ) buttons
AN-PR1000H
ENGLISH
or ) button for less than
E-26