Maintenance; Specifications - Sharp AN-PR1000H Operation Manual

Maintenance

Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth.
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage the
cabinet finish.
Do not apply oil to the inside of each component. It may cause malfunctions.

Specifications

As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The per-
formance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
Main unit
Amplifier section
Power source AC 220 V - 240 V, 50 Hz
Power consumption Power on: 80 W
Power stand-by: 0.6 W
Amplification system Front speaker: Pulse width modulation
Subwoofer:
Frequency range FM : 87.5 - 108 MHz
Output power Front speaker: RMS: 150W (75W + 75W) (DIN 45 324)
Subwoofer:
Audio input terminals Optical digital input (DIGITAL 1/2): Square type 2
Coaxial digital input (DIGITAL 3): RCA type 1
Analog input (LINE 1): RCA type 1 pair (L/R)
Analog input (LINE 2): RCA type 1 pair (L/R)
Analog input (LINE 3): RCA type 1 pair (L/R)
Audio output terminal Subwoofer Pre Out: 10 kohms
Front speaker section
Type 2-way type speaker system (Magnetic shield)
5 cm (2") Tweeter 1
10 cm (4") Woofer 1
Impedance 4 ohms
Pulse width modulation
RMS: 150W (75W + 75W) (DIN 45 324)
General
Dimensions Width: 1230 mm (48-7/16")
Height: 476 mm (18-3/4")
Depth: 397 mm (15-5-/8")
Weight 46.5 kg (102.3 lbs.)
Glass on top of unit The maximum load/weight: 100 kg
Subwoofer
Type Bass reflex system
16 cm (6-1/2") Woofer 1
Maximum input power 150 W
Impedance 4 ohms
Remote control
Power source DC 3V ["AAA" size (UM-4, R03, HP-16 or similar) battery
2]
AN-PR1000H
ENGLISH
E-40