Front Wheel - Honda NC700S Owner's Manual

12 NC700S (NM-1)-32MGS600.book 100 ページ ２０１２年４月１８日 水曜日 午後６時１７分
Tyre Puncture u Removing Wheels
(NC700SA/SD only)
When removing and installing the wheel, be
careful not to damage the wheel speed
sensor and pulser ring.
❙

Front Wheel

Removal
1. Park on a firm, level surface.
2. Cover both sides of the front wheel and
brake caliper with protective tape or
cloth.
Tape or Mounting
cloth bolts
Brake
caliper
Pulser ring (NC700SA/SD only)
100
Wheel speed sensor
(NC700SA/SD only)
3. On the right side, remove the mounting
bolts and remove the brake caliper.
u Support the brake caliper assembly so
that it doesn't hang from the brake
hose. Do not twist the brake hose.
u Avoid getting grease, oil, or dirt on
the disc or pad surfaces.
u (NC700S)
Do not pull the brake lever while the
brake caliper is removed.
(NC700SA/SD)
Do not pull the brake lever or push the
brake pedal while the brake caliper is
removed.
u Take care to prevent the brake caliper
from scratching the wheel during
removal.