Honda NC700S Owner's Manual page 27

12 NC700S (NM-1)-32MGS600.book 24 ページ ２０１２年４月１８日 水曜日 午後６時１７分
Instruments
Display Setting
You can adjust the three settings.
• Backlight brightness adjustment
• Clock setting
• (III E type only) Changing of speed and
mileage unit
Ordinary display
Display setting
Backlight brightness adjustment
Clock setting
Changing of speed and mileage unit
Press and hold A button and B button
Press A button (Except III E type)
Press A button (III E type only)
24
In addition, to move the ordinary display at
display setting.
• The button is not pressed for about 30
seconds
• Turn the ignition switch off and then on
Each setting will be cancelled if the A button
is not pressed.
1 Backlight brightness adjustment:
You can adjust the brightness three levels.
!a Turn the ignition switch to ON.
!b Press and hold A button and B button until
the minute digit displays the brightness
level.
!c Press B button. The brightness is switched.
!d Press A button. The backlight is set, and
then the display moves to the clock setting.