Honda NC700S Owner's Manual page 107

12 NC700S (NM-1)-32MGS600.book 104 ページ ２０１２年４月１８日 水曜日 午後６時１７分
Tyre Puncture u Removing Wheels
4. Loosen the rear axle nut, lock nuts and
turn the adjusting nuts so the rear wheel
can be moved all the way forward for
maximum drive chain slack.
5. Remove the rear axle nut.
6. Remove the drive chain from the rear
wheel sprocket by pushing the rear wheel
forward.
104
Wheel speed sensor (NC700SA/SD only)
Pulser ring
(NC700SA/SD only)
Adjusting nut
Lock nut
Rear axle shaft
Drive
chain
Washer Adjusting nut
Rear axle
nut
Washers
Lock nut