Fuses - Honda NC700S Owner's Manual

Hide thumbs Also See for NC700S:
Table of Contents

Advertisement

12 NC700S (NM-1)-32MGS600.book 56 ページ 2012年4月18日 水曜日 午後6時17分
Maintenance Fundamentals
3. If the terminals are heavily corroded, clean
and polish the terminals with a wire brush or
sandpaper. Wear safety glasses.
4. After cleaning, reinstall the battery.
The battery has a limited life span. Consult your
dealer about when you should replace the
battery. Always replace the battery with
another maintenance-free battery of the same
type.
NOTICE
Installing non-Honda electrical accessories can overload
the electrical system, discharging the battery and possibly
damaging the system.
56

Fuses

Fuses protect the electrical circuits on your
motorcycle. If something electrical on your
motorcycle stops working, check for and
replace any blown fuses.
2
Inspecting and Replacing Fuses
Turn off the ignition switch to remove and
inspect fuses. If a fuse is blown, replace with a
fuse of the same rating. For fuse ratings, see
"Specifications."
P. 128
2
Blown fuse
NOTICE
Replacing a fuse with one that has a higher rating greatly
increases the chance of damage to the electrical system.
P. 112

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nc700saNc700sd

Table of Contents