(Fig. 7-3)
(Fig. 7-4)
(Fig. 7-5)
Confirm by pressing OK.
>
The alphabetically sorted Total list will be displayed,
containing all programmes. (Fig. 7-3)
Use the arrow keys up/down to mark the pro-
>
gramme you wish to view.
Confirm by pressing OK.
>
7.2.4 Calling up blocked programmes
If a programme is selected that has been blocked b y the
parental control function, the message Unit PIN will be
displayed on screen. (Fig. 7-4)
Use the numeric keys to enter your PIN code. The
>
desired programme can now be viewed.
or
>
Switch to a programme that is not blocked.
If you have selected the setting on under Point 8.3.2, the
request for the PIN code will be displayed every time you
select a blocked programme. However, to make operation
more convenient for you, the PIN code must be entered only
once during an operating phase.
If you are using a CONAX Smartcard, please note
Point 7.3.2.
7.2.5 Information box
Every time you switch programmes, an information box will be
displayed briefly (Fig. 7-5) showing the programme slot as
well as the name of the programme selected. In addition,
other programme characteristics will be indicated, for example
for video text,
encrypted programmes. Also, where broadcast, the EPG
genre will be displayed, plus any age restriction (FSK =
Freiwillige Selbstkontrolle der Filmwirtschaft in Germany).
7.3 Receiving encrypted programmes
Your receiver is equipped with an integrated CONAX deco-
ding system as well as with a Common Interface. This allows
you to receive encrypted programmes. To do this, you must
first insert either a CONAX Smartcard into the integrated card
reader, or insert a CI module including a valid Smartcard in
the slot provided:
Insert the CONAX Smartcard in the card slot of the
>
integrated card reader (gold-coloured chip on the bot-
tom).
or
Insert a CI module into the slot.
>
20
for a 16/9 format programme,
for