SECTION 8—SEAT
Adjusting the Back Angle (Semi-Recline Back)
NOTE: For this procedure, refer to FIGURE 8.2.
1. Lift up on the release handle and adjust seat to desired angle.
2. Let go of the release handle to lock the back in position.
Release Handle
Office Style
Van Seat
FIGURE 8.2 Adjusting the Back Angle (Semi-Recline Back)
Adjusting the Headrest
NOTE: For this procedure, refer to FIGURE 8.3.
1. To raise the headrest, lift the headrest up to the desired position.
2. To lower the headrest, push the release tab towards the front of the wheelchair. Lower
the headrest to the desired position.
Headrest
Release Tab
Headrest
Tube
FIGURE 8.3 Adjusting the Headrest
39
Part No. 1143206
Pronto® M41 with SureStep®