SECTION 9—FOOTBOARD ASSEMBLY
Height
NOTE: For this procedure, refer to FIGURE 9.4.
1. Remove the quick release pin that secures the footboard assembly to the wheelchair
frame.
2. Remove the mounting bolt, sleeve, and locknut that secures the footboard to footboard
support bracket.
3. Align the footbard to one of the mounting holes on the footboard support bracket.
4. Secure the footboard to the footboard support bracket with the mounting bolt, sleeve
and locknut. Securely tighten.
Mounting Holes
Sleeve
Locknut
FIGURE 9.4 Adjusting the Footboard Assembly - Height
Pronto® M41 with SureStep®
Footboard Support Bracket
44
Mounting
Bolt
Footboard
Part No. 1143206