Installing - Invacare Pronto M91 Owner's Manual

SECTION 10—SHROUD/WHEELS

Installing

1. Perform one of the following:
• Top Shroud ‐ Position top shroud on to the base frame and gently press down on
top shroud to secure the four hook and loop strips that secure the top shroud to the
base frame (Detail "A").
• Front Shroud ‐ Position front shroud onto the two base frame hooks. Turn release
knob ¼‐turn to the locked position (Detail "B").
2. Reinstall the seat. Refer to Removing/Installing the Seat Assembly on page 36.
DETAIL "A" - TOP SHROUD
Rear of
Wheelchair
Base Frame
Hook and
Loop Strips
Pronto® M91™ with SureStep®
Top Shroud
Seat Supports
Front of
Wheelchair
FIGURE 10.1 Removing/Installing the Shrouds
DETAIL "B" - FRONT SHROUD
Base
Frame
Hooks
56
Front
Shroud
Release
Knob
Part No 1141450