Replacing The Seat Positioning Strap - Invacare Pronto M91 Owner's Manual

Replacing the Seat Positioning Strap

ALWAYS wear your seat positioning strap.
The seat positioning strap is a positioning belt ONLY. It is not designed for use as a
safety device withstanding high stress loads such as auto or aircraft safety belts. If
signs of wear appear, belt must be replaced IMMEDIATELY.
NOTE: For this procedure, refer to FIGURE 7.7 on page 41.
1. Remove the two mounting screws and washers that secure the seat positioning straps
to the seat frame.
2. Remove the two halves of the seat positioning strap from the rear seat frame.
3. Reposition the two new seat positioning strap halves underneath seat rails.
4. Reinstall the two mounting screws and washers that secure the seat positioning straps
to the seat frame. Securely tighten.
Seat Frame
Rear of Seat Frame
Washer
Seat
Positioning
Strap
Mounting Screws
Part No 1141450
WARNING
FIGURE 7.7 Replacing the Seat Positioning Strap
Front of Seat Frame
Washer
41
Pronto® M91™ with SureStep®
SECTION 7—SEAT
Seat
Assembly
Seat
Positioning
Strap
Seat Rail