Troubleshooting Procedure - Lenovo ThinkCentre M93z Hardware Maintenance Manual

1. Move the pointer to the top-right or bottom-right corner of the screen to display the charms.
2. Click Settings.
3. Click Control Panel.
• From the Start screen
– For Windows 8:
1. Move the pointer to the top-right or bottom-right corner of the screen to display the charms.
2. Click Search.
3. On the Apps screen, scroll to the right side, and click Control Panel in the Windows System
section.
– For Windows 8.1:
1. Click the arrow icon
2. Scroll to the right side, and click Control Panel in the Windows System section.

Troubleshooting procedure

Use the following procedure as a starting point for diagnosing problems you are experiencing with your
computer:
1. Verify that the cables for all attached devices are connected correctly and securely.
2. Verify that all attached devices that require ac power are connected to properly grounded, functioning
electrical outlets.
3. Verify that all attached devices are enabled in the BIOS settings of your computer. For more information
about accessing and changing the BIOS settings, refer to your Chapter 6 "Using the Setup Utility
program" on page 55.
4. Go to the "Troubleshooting" on page 37 and follow the instructions for the type of problem you are
experiencing. If the Troubleshooting information does not help you resolve a problem, continue with the
next step.
5. Try using a previously captured configuration to see if a recent change to hardware or software settings
has caused a problem. Before restoring a previous configuration, capture your current configuration in
case the older configuration settings do not solve the problem or have adverse affects. To restore a
captured configuration, do the following:
• For Windows 7: Click Start ➙ Control Panel ➙ System and Security ➙ System ➙ System
Protection ➙ System Restore.
• For Windows 8 or Windows 8.1: Open Control Panel, and then click System and Security ➙ System
➙ System Protection ➙ System Restore.
If this does not correct the problem, continue with the next step.
6. Run the diagnostic program. See "Lenovo Solution Center" on page 53 for more information.
• If the diagnostic program detects a hardware failure, contact the Lenovo Customer Support Center.
See "Lenovo Support Web site" on page 31 for more information.
• If you are unable to run the diagnostic program, contact the Lenovo Customer Support Center. See
"Lenovo Support Web site" on page 31 for more information.
• If the diagnostic program does not detect a hardware failure, continue with the next step.
7. Use an antivirus program to see if your computer has been infected by a virus. If the program detects a
virus, remove the virus.
8. If none of these actions solve the problem, seek technical assistance. See "Lenovo Support Web
site" on page 31 for more information.
36
ThinkCentre M93z Hardware Maintenance Manual
in the bottom-left corner of the screen to go to the Apps screen.