Replacing The Integrated Camera - Lenovo ThinkCentre M93z Hardware Maintenance Manual

Figure 34. Removing the cover presence switch
9. Connect the cover presence switch cable to the system board. See "Locating parts on the system
board" on page 74.
10. Align the screw holes in the VESA mount bracket with those in the chassis, and then install the screws
to secure the VESA mount bracket to the chassis.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 127.

Replacing the integrated camera

Attention:
Do not open your computer or attempt any repair before reading and understanding "Important Safety Information"
on page 1.
.
Chapter 9 Replacing FRUs
103