Grounding Requirements; Tip-Over Hazard Prevention Notice; Safety Notices (Multi-Lingual Translations) - Lenovo ThinkCentre M93z Hardware Maintenance Manual

• Wear a grounded wrist strap against your skin to eliminate static on your body.
• Prevent the part from touching your clothing. Most clothing is insulative and retains a charge even when
you are wearing a wrist strap.
• Use the black side of a grounded work mat to provide a static-free work surface. The mat is especially
useful when handling ESD-sensitive devices.
• Select a grounding system, such as those listed below, to provide protection that meets the specific
service requirement.
Note: The use of a grounding system is desirable but not required to protect against ESD damage.
– Attach the ESD ground clip to any frame ground, ground braid, or green-wire ground.
– Use an ESD common ground or reference point when working on a double-insulated or
battery-operated system. You can use coax or connector-outside shells on these systems.
– Use the round ground-prong of the ac plug on ac-operated computers.

Grounding requirements

Electrical grounding of the computer is required for operator safety and correct system function. Proper
grounding of the electrical outlet can be verified by a certified electrician.

Tip-over hazard prevention notice

• Place the computer on a sturdy and low base, or anchor the furniture and position the computer as
far back on the furniture as possible.
• Keep remote controls, toys, and other items that might attract children off the computer.
• Keep the computer, cables, and cords out of the reach of children.
• Supervise children in rooms where these safety tips have not been followed.

Safety notices (multi-lingual translations)

The caution and danger safety notices in this section are provided in the following languages:
• English
• Arabic
• Brazilian/Portuguese
• Chinese (simplified)
• Chinese (traditional)
• French
• German
• Hebrew
• Italian
• Korean
• Spanish
6
ThinkCentre M93z Hardware Maintenance Manual