Completing The Parts Replacement - Lenovo ThinkCentre M93z Hardware Maintenance Manual

Machine types: 10ac, 10ad, 10ae and 10af
Hide thumbs Also See for ThinkCentre M93z:
Table of Contents

Advertisement

Figure 57. Installing the WiFi antennas
Notes:
• The black cable should be connected to the lower WiFi card connector MAIN. The grey cable should
be connected to the upper WiFi card connector AUX.
• Ensure that the WiFi cables are routed correctly. Keep the WiFi cables clear of the hinges and sides
of the computer chassis to avoid interference with reinstalling the computer cover.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 127.

Completing the parts replacement

After completing the installation or replacement for all parts, you need to reinstall the computer cover and
reconnect cables. Depending on the parts you installed or replaced, you might need to confirm the updated
information in the Setup Utility program. Refer to Chapter 6 "Using the Setup Utility program" on page 55.
To reinstall the computer cover and reconnect cables to your computer, do the following:
1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left
inside your computer. See "Locating major FRUs and CRUs" on page 71 for the locations of various
components in your computer.
2. Ensure that the cables are routed correctly before reinstalling the computer cover. Keep cables clear of
the hinges and sides of the computer chassis to avoid interference with reinstalling the computer cover.
.
Chapter 9
Replacing FRUs
127

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents