Mellanox Technologies Mellanox SX1018 Release Note page 8

Ethernet managed blade switch
Hide thumbs Also See for Mellanox SX1018:
Table of Contents

Advertisement

Table 4 - General Known Issues (Sheet 2 of 2)
Index
Category
9.
Configuration Manage-
ment
10.
Configuration Manage-
ment
11.
Configuration Manage-
ment
12.
Logging
13.
Logging
14.
User Management
15.
WebUI
16.
WebUI
17.
WebUI
18.
SNMP
19.
Chassis Management
20.
IP Routing
Description
Loading the wrong system configuration file may
hang the system.
For example: an attempt to use an SX1016 config-
uration file on an SX6036/SX6536/SX1035 sys-
tem may cause the system to hang.
After loading a new configuration file, please
reboot the system. Otherwise, configuration might
not be properly applied.
Prior to license deletion make sure to be in an
allowed profile. Failing to do so results in errors.
"DROPPED MSG" errors may appear during
reload (shutdown phase). These errors can be
safely ignored.
The following error may appear in the log during
system de-init:
"[mdreq.ERR]: init(), mdr_main.c:634, build 1:
Error code 14014"
This error can be safely ignored.
Some RADIUS and TACACS+ configurations
keep the user locked out of the machine due to
timeout limitation.
Only a single WebUI login per host is possible.
Reversing the time clock can result in WebUI
graphs' corrupted data.
Enabling/disabling HTTPS while connected via
HTTP to the WebUI may result in temporary loss
of connection to the webpage.
The error "Cannot find module (MELLANOX-
MIB)" can appear in the log when performing roll-
back to a MLNX-OS version older than 3.3.3000.
This error can be safely ignored.
Supported USB flash drives are USBv2 protocol
and above.
The current release does not support L3.
Mellanox® Technologies Confidential
Possible Workaround
Press the reset button for 15
seconds, and then log in
using your local authentica-
tion. Additionally, fix the
configuration to avoid any
future timeout issues.
To have multi-sessions,
open several browser simul-
taneously.
Clear the graphs data after
setting the clock.
Refresh the page or navi-
gate back using the
browser's back button.
Mellanox Technologies
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sx1018hp

Table of Contents