Checking Of Connection - Yamaha YZ85(R)/LC Owner's Service Manual

Table of Contents

CHECKING OF CONNECTION

CHECKING OF CONNECTION

Dealing with stains, rust, moisture, etc. on the

1. Disconnect:

2. Dry each terminal with an air blower.

3. Connect and disconnect the connector two

or three times.

4. Pull the lead to check that it will not come

5. If the terminal comes off, bend up the pin

1 and reinsert the terminal into the con-

The two connectors "click" together.

7. Check for continuity with a tester.

If there in no continuity, clean the terminals.

Be sure to perform the steps 1 to 7 listed

above when checking the wireharness.

For a field remedy, use a contact revitalizer

available on the market.

Use the tester on the connector as shown.

Show Quick Links

Table of Contents