Yamaha YZ85(R)/LC Owner's Service Manual page 412

Table of Contents

Advertisement

HANDLEBAR
4. Install:
Collar 1
G
Tube guide 2
G
Grip cap (upper) 3
G
Throttle cable 4
G
NOTE:
Apply the lithium soap base grease on the
throttle cable end and tube guide cable wind-
ing portion.
5PA51380
5. Install:
Throttle cable cap 1
G
Screw (throttle cable cap) 2
G
Grip cap (lower) 3
G
Screw (grip cap) 4
G
Cover (grip cap) 5
G
5PA51390
WARNING
After tightening the screws, check that the
throttle grip 6 moves smoothly. If it does
not, retighten the screws (grip cap) for
adjustment.
5PA51400
6. Install:
Brake master cylinder 1
G
Brake master cylinder bracket 2
G
Bolt (brake master cylinder bracket) 3
G
NOTE:
Install the bracket so that the arrow mark a
G
face upward.
First tighten the bolts on the upper side of the
G
5PA51410
brake master cylinder bracket, and then
tighten the bolts on the lower side.
5 - 44
CHAS
1 Nm (0.1 m · kg, 0.7 ft · lb)
4 Nm (0.4 m · kg, 2.9 ft · lb)
9 Nm (0.9 m · kg, 6.5 ft · lb)

Advertisement

Table of Contents
loading

Table of Contents