Registration And Data Model - HP Brocade 8/24c Developer's Manual

3
Launch In Context profile
TABLE 11
LIC name
Fabric_ProductStatus_Log
Fabric_Router_Configuration
Fabric_Security_Log
Fabric_Syslog
Fabric_Syslog_Forwarding
FCoE_Configuration
Names
Server_Info
User_Management
User_Preferences
VLAN_Configuration

Registration and data model

Figure 26
The Brocade_LICServiceAccessPoint of Configuration Tool and Brocade Network Advisor client are
associated to Brocade_ManagementServer through
Brocade_LICMgmtServerHostedServiceAccessPoint. Other than the Configuration Tool and
Brocade Network Advisor client, the service access points are associated to Brocade_SAN through
Brocade_LICSANHostedServiceAccessPoint.
Each Brocade Network Advisor's service launch point is represented by an instance of
Brocade_LICServiceAccessPoint. The access point is hosted on the Brocade_SAN.
The value of Brocade_LICServiceAccessPoint.AccessInfo property is of the following format:
http://<IP Address: port number>/webstart/<JNLP file name>?module=<Network Advisor module
name>&<SSO parameters if any from Network Advisor client>&${parameterName}
Where ${parameterName} specifies the LIC parameters supported for the specific Network Advisor
dialog box URL.
The Brocade_LICServiceAccessPoint.ParameterName is an array holding the LIC parameters
specified in the URL of AccessInfo property value. The
Brocade_LICServiceAccessPoint.ParameterDescription is holding the description of the parameters
in the ParameterName array.
In the AcessInfo URL, replace the ${parameterName} with name and value of the ParameterName
array in the format mentioned in the description.
54
Description of LIC names (Continued)
shows the class diagram of the LIC profile.
Description
Displays events which indicate a change in switch
status for all discovered switches.
Configures FC routing to connect devices in
different fabrics without merging the fabrics.
Enables you to connect edge fabrics to a backbone
fabric.
Displays all security events for the discovered
switches.
Displays syslog messages from switches.
Configures forwarding syslog events of this server
to a destination on a different host.
Creates, edits, and deletes the FCoE login groups
and view the connected devices for FCoE ports.
Configures a user-defined name to the fabric,
switch, port, or device.
Displays all parameters associated with the server.
Configures the users and their roles in the
management application.
Configures the options available in the
management application.
Configures VLAN on switches.
Brocade Network Advisor SMI Agent Developer's Guide
53-1002169-01