HP Brocade 8/24c Developer's Manual page 116

4
Alert indications
TABLE 14
Message ID
FC1
104
Supported alert indications
Trigger
One of the following:
•
Zoning database merge was
completed.
How to trigger: Create a zoning
configuration on two switches. Connect
the two switches through an E_Port.
•
Configuration was saved into
persistent store.
How to trigger: Change the zoning
configuration and save the configuration.
You can also do this through the CLIs
zoneadd and cfgsave.
•
Configuration was disabled and now
the previously active configuration is
inactive. Note that when a zone
configuration is disabled and the
default zoning mode is set to
NoAccess, then the zone
configuration is enabled and the
ConfigEnabled indication is
delivered.
How to trigger: Disable the zoning
configuration. You can also do this
through the CLI cfgdisable.
•
Configuration changes made were
committed.
How to trigger: Commit zone changes
using the CLI cfgsave or using the SMI
Brocade_ZoneService.SessionControl
extrinsic method.
Query: SELECT * FROM
CIM_AlertIndication WHERE
OwningEntity=SNIA and MessageID=FC1
Property
AlertingManagedElement
AlertingElementFormat
AlertType
OtherAlertType
AlertSubType
PerceivedSeverity
ProbableCause
SystemCreationClassName
SystemName
ProviderName
OwningEntity
Message
MessageArguments
Brocade Network Advisor SMI Agent Developer's Guide
Value
COP of Brocade_Fabric
COP
Device Alert
N/A
Database Change
Completed
2 (Informational)
123
Brocade_Fabric
Fabric WWN
Brocade_AlertIndication
Provider
SNIA
Zone database changed
for <Fabric Identity Type>
<WWN>
Fabric, Fabric WWN
53-1002169-01