HP Brocade 8/24c Developer's Manual page 83

•
•
•
FIGURE 31
Brocade Network Advisor SMI Agent Developer's Guide
53-1002169-01
An existing Brocade_CEEACLPolicy instance may be modified using the
Brocade_CEEACLService.ModifyRole() extrinsic method. The input parameters Role and
Privileges are required. Refer to MOF content for details on the parameters. The call replaces
the existing Brocade_CEEACLRules instance for the Brocade_CEEACLPolicy specified in the
input parameter Role with the instance of Brocade_CEEACLRules specified in the input
parameter Privileges. Assigning to targets is not supported during modification. This can be
done separately through the AssignRoles operation.
An existing Brocade_CEEACLPolicy instance may be deleted using the
Brocade_CEEACLService.DeleteRole() extrinsic method. This method deletes the instance and
its associated rules.
A Brocade_CEEACLPolicy may be applied to an Ethernet port, LAG, or VLAN using the
Brocade_CEEACLService.AssignRoles() extrinsic method. Only one policy can be applied at a
time on a Managed Element.
CEE ACL class diagram
CEE switch support
3
71