Advertisement
Closed defect summary
Even when no configuration is present on the right-
pane of the PDCM dialog, various buttons remain
enabled.
Symptom—When the customer selects a configuration
node on the left tree of the PDCM dialog without
moving any configuration to the right pane, buttons
like Activate, New, Save, Save As, Analyze Zone
Conflict, and so on, remain enabled.
In PDCM dialog, the columns Area ID, Port Name and
Blocked Ports are not stationary. In PDCM dialog,
when user scrolls through the matrix, the columns Area
ID, Port Name, and Blocked Ports also move and do
not remain stationary, making it difficult for the user
to locate the exact coordinates for the ports in the
matrix.
Traffic Isolation Zone properties are not available in
the Compare/Merge dialog.
Symptom—When user launches Compare/Merge
dialog, the Traffic Isolation Zone node appears without
its properties.
The slot number, Port Number, and Port Speed columns
in the port properties table use string sorting as op-
posed to the desired numeric sorting. This should be
changed.
Symptom—Currently the sorting in the Port Speed, Port
Number, and Slot column in the port properties table
is a string sort. Since these columns display integers
numerically, the sorting displayed should be the sorting
that should be implemented, as currently searching
for particular port details from this table is a tedious
task.
The Type column (specifying the speed, portcount, and
so on) is missing from the switch properties table.
Symptom—User does not see a Type column specifying
the speed, portcount, and other information in the
switch properties table
IFLs are not being displayed for a backbone fabric.
Symptom—IFLs are not being displayed in topology.
For the link between a switch and a device, the
nl
selected connection properties section (in the connec-
tion properties table) is being removed.
Symptom—User views the same port details in both
columns of the selected connection properties section
in the Connection Property table; moreover, most of
the column in the section for the above scenario is
always blank.
Solution
Fixed in DCFM 10.1.0
Fixed in DCFM 10.1.0
Fixed in DCFM 10.1.0
Workaround—Traffic Isolation Zone properties
appears in Zoning dialog.
Fixed in DCFM 10.1.0
Fixed in DCFM 10.1.0
Fixed in DCFM 10.1.0
Fixed in DCFM 10.1.0
Workaround—View the correct occupied port details
connected to the switch using the switchshow CLI
command.
HP StorageWorks B-series Data Center Fabric Manager Enterprise
13
Advertisement
