Network Advisor Smi Agent Migration - Brocade Communications Systems Brocade 8/12c Manual

Network Advisor SMI Agent migration

The following migration paths are supported:
•
Network Advisor SMI Agent 11.0.X to Network Advisor SMI Agent 11.1.X
Use the following procedure to migrate data from Network Advisor SMI Agent to Network Advisor SMI Agent software.
Migrating from Network Advisor SMI Agent
1. Click Next on the Welcome screen.
2. Choose one of the following options and click Next.
•
If data is detected on your system (automatically detected), select Yes, from Network Advisor in the following
location.
•
If data is not detected, the select Yes, from Network Advisor installed in this machine or on network and
click Browse to browse to the installation directory.
3. Click Start on the Data Migration screen.
Data migration may take several minutes. When data migration is complete, the previous version is partially
uninstalled.
4. Click Next on the Data Migration screen.
5. Complete the following steps on the Server IP Configuration screen.
FIGURE 33 Server IP Configuration screen
a. Select an address from the Server IP Configuration list.
b. Select an address from the Switch - Server IP Configuration Preferred Address list.
Brocade Network Advisor Migration Guide
53-1002321-01
Network Advisor 11.0.X to 11.1.X command mapping
71 of 82