3. World Wide Name (WWN)
Brocade Network Advisor SMI Agent support
Report any problems or issues in using the Brocade Network Advisor SMI Agent to the following
e-mail address:
When contacting support at Brocade, provide the following:
•
•
•
•
Document feedback
Quality is our first concern at Brocade and we have made every effort to ensure the accuracy and
completeness of this document. However, if you find an error or an omission, or you think that a
topic needs further development, we want to hear from you. Forward your feedback to:
Provide the title and version number of the document and as much detail as possible about your
comment, including the topic heading and page number and your suggestions for improvement.
xiv
•
The switch serial number and corresponding bar code are provided on the serial number
label, as illustrated below.
*FT00X0054E9*
FT00X0054E9
•
Use the licenseIdShow command to display the WWN of the chassis.
•
If you cannot use the licenseIdShow command because the switch is inoperable, you can
get the WWN from the same place as the serial number, except for the Brocade DCX. For
the Brocade DCX, access the numbers on the WWN cards by removing the Brocade logo
plate at the top of the non-port side of the chassis.
support@brocade.com
Brocade Network Advisor supportSave. Refer to the Brocade Network Advisor User Manual for
the steps involved in running the supportSave command.
Steps followed to produce the problem
Error messages received
Sample code exhibiting problem (if possible)
documentation@brocade.com
Brocade Network Advisor SMI Agent Developer's Guide
53-1002701-01