Brocade Communications Systems Brocade 8/12c Manual page 52

Network Advisor migration
14. Enter your user name and password.
The defaults are Administrator and password, respectively. If you migrated from a previous release, your
username and password do not change.
15. Click Login.
16. Click OK on the Network Advisor Login Banner.
Migrating from Professional to Licensed Version
NOTE
Licensed Version to Professional migration is not supported.
Use the following procedure to migrate from Professional software to Licensed Version software.
1. Click Next on the Welcome screen.
2. Choose one of the following options:
•
If data is detected on your system, one of the following screens display:
A message displays. Click Yes on the message and click Next on the Partial Data Migration screen. Go

to step 13.
The Copy Data and Settings screen displays. To migrate data from the previous version installed

(automatically detected), select Yes, from DCFM or Network Advisor in the following location. Continue
with step 3.
•
If data is not detected, the Copy Data and Settings screen displays. Complete the following steps.
a. Select Yes, from Network Advisor installed in this machine or on network and click Browse to browse to
the installation directory.
b. Click Next on the Copy Data and Settings screen. Continue with
3. Click Start on the Data Migration screen.
Data migration may take several minutes. When data migration is complete, the previous version is partially
uninstalled.
4. Click Next on the Data Migration screen.
5. Select Network Advisor - Licensed Version on the Installation Type screen and click Next.
6. If you are installing a licensed edition, enter the license key (on the Key Certificate) on the Server License screen
or browse to the license file (.xml) and click Next.
The License Key field is not case-sensitive.
7. Select Internal FTP Server or External FTP Server on the FTP Server screen and click Next.
The default selection reflects the previous Professional edition configuration.
If port 21 is busy, a message displays. Click OK to close the message and continue. Once the Management
application is configured make sure port 21 is free and restart the Server to start the FTP service.
NOTE
If you select to use an FTP Server which is not configured on the same machine as Network Advisor, the
Firmware Repository feature will not be available.
52 of 82
step 3.
Brocade Network Advisor Migration Guide
53-1002321-01