Brocade Communications Systems Brocade 8/12c Manual page 64

Network Advisor migration
11. (SAN Enterprise only) Select one of the following options on the SAN Network Size screen and click Next:
NOTE
Port count is equal to the total number of switch ports across all fabrics.
•
Small (managing up to 2000 switch ports, 1-20 domains)
•
Medium (managing up to 5000 switch ports, 21-60 domains)
•
Large (managing up to 9000 switch ports, 61-120 domains)
12. Verify your configuration information on the Server Configuration Summary screen and click Next.
13. Complete the following steps on the Start Server screen.
FIGURE 28
Start Server screen
a. Select the Start SMI Agent check box, if necessary.
Only enabled if you enabled SMI Agent on the SMI Agent Configuration screen.
b. Select the Start SLP check box, if necessary.
Only enabled if you enabled SMI Agent on the SMI Agent Configuration screen.
c. Select the Start Client check box, if necessary.
d. Click Finish.
After all of the services (Server, SLP, SMI Agent and Client) are started, the Log In dialog box displays.
14. Enter your user name and password.
The defaults are Administrator and password, respectively. If you migrated from a previous release, your
username and password do not change.
15. Click Login.
16. Click OK on the Network Advisor Login Banner.
64 of 82 Brocade Network Advisor Migration Guide
53-1002321-01