Brocade Communications Systems Brocade 8/12c Manual page 56

Network Advisor migration
Use Table 27 to migrate data from Trial software. If you have not installed the application, refer to
application" on page 24
TABLE 27 Network Advisor trial migration paths
Current Software Release
Trial 11.X.X
Trial 11.X.X
Migrating from Trial to Trial
Use the following procedure to migrate from trial to trial.
1. Click Next on the Welcome screen.
2. Choose one of the following options:
•
If data is detected on your system, one of the following screens display:
A message displays. Click Yes on the message and click Next on the Partial Data Migration screen. Go

to step 13.
The Copy Data and Settings screen displays. To migrate data from the previous version installed

(automatically detected), select Yes, from DCFM or Network Advisor in the following location. Continue
with step 3.
•
If data is not detected, the Copy Data and Settings screen displays. Complete the following steps:
a. Select Yes, from Network Advisor installed in this machine or on network and click Browse to browse to
the installation directory.
b. Click Next on the Copy Data and Settings screen. Continue with
3. Click Start on the Data Migration screen.
Data migration may take several minutes. When data migration is complete, the previous version is partially
uninstalled.
4. Click Next on the Data Migration screen.
5. Select Network Advisor - 75 days trial on the Installation Type screen and click Next.
ATTENTION
If you choose to install Trial software, once the trial period ends (75 days), you must upgrade to Licensed Version
software.
6. Complete the following steps on the Trial Configuration screen.
a. (SAN with SMI Agent) Select one of the following from the SAN with SMI Agent options:
- Enterprise (9000 switch ports, 24 fabrics and 10,000 devices)
Required for evaluation of DCX Backbone and FICON management.
- Professional Plus (2560 switch ports, 4 fabrics and 4096 devices)
b. Click Next.
56 of 82
To Software Release
Trial 11.1.X
Licensed Version 11.1.X
Migration Procedures
To migrate from Trial to Trial, refer to
page 56.
To migrate from Trial to Licensed Version, refer to
Trial to Licensed Version" on page 61.
step
Brocade Network Advisor Migration Guide
"Installing the
"Migrating from Trial to Trial"
"Migrating from
3.
53-1002321-01
on