Brocade Communications Systems Brocade 8/12c Manual page 57

7. Select Internal FTP Server or External FTP Server on the FTP Server screen and click Next.
The default selection reflects the previous Professional Plus edition configuration.
If port 21 is busy, a message displays. Click OK to close the message and continue. Once the Management
application is configured make sure port 21 is free and restart the Server to start the FTP service.
NOTE
If you select to use an FTP Server which is not configured on the same machine as Network Advisor, the
Firmware Repository feature will not be available.
8. Complete the following steps on the Server IP Configuration screen.
FIGURE 21
Server IP Configuration screen
a. Select an address from the Server IP Configuration list.
b. Select an address from the Switch - Server IP Configuration Preferred Address list.
c. Click Next.
If DNS is not configured for your network, do not select the 'hostname' option from either the Server IP
Configuration or Switch - Server IP Configuration Preferred Address list. Selecting the 'hostname' option
prevents clients and devices from communicating with the Server.
If you select a specific IP address from the Server IP Configuration screen and the selected IP address
changes, you will not be able to connect to the server. To change the IP address, refer to
explicit server IP address"
Brocade Network Advisor Migration Guide
53-1002321-01
on page 78.
Network Advisor migration
"Configuring an
57 of 82