Ms6001B/Ms7001Ea/Ms9001E - GE Gas Turbine Manual

MS6001B/MS7001EA/MS9001E

Available for Oil & Gas App lications
APPLICATIONS
The 7EA is fuel-flexible, and can operate on natural gas,
liquefied natural gas (LNG), distillate and treated residual
oil in a variety of applications including:
- mechanical drive for large compressor trains
- simple cycle and combined cycle
- base load and peaking power generation
- industrial and cogeneration
MS6001B
The MS6001 is a single-shaft, heavy-duty gas turbine. The
high efficiency axial compressor has 17 stages. The
combustor has ten combustion chambers with individual
fuel nozzles. The machine has a three-stage impulse turbine
with air-cooled buckets and stationary nozzles on the first
two stages to achieve higher firing temperatures and
consequently higher efficiency without compromising hot
section component life.
MS6001B
Gas Turbine
FEATURES
- 17-stage compressor with stacked disk design
- reverse flow combustion system with an individual nozzle single
combustion chamber
- 3-stage turbine with air-cooled, first and second-stage nozzles and
buckets
- three-bearing rotor supports
MS7001EA
The GE MS7001EA is a highly reliable, mid-sized
packaged power plant developed specifically for 60 Hz
applications. With design emphasis placed on energy
efficiency, availability, performance and maintainability,
the 7EA is a proven technology machine with more than
775 units of its class installed or on order worldwide as
of December 1999. The simple, medium-sized design of
the 7EA lends itself to flexibility in plant layout and
easy, low cost addition of power augmentation when
phased capacity expansion is needed. A predecessor of
the 7FA, the 7EA is ideal for plants that require high
efficiency along with shaft speed for direct coupling to
the generator.
MS7001EA
Gas Turbine
MS9001E
The MS9001 is a single-shaft, heavy-duty gas turbine
developed for generator drive service in the 50 Hz
market. Its efficiency is approx 33% in simple cycle
mode and over 50% when operated as a combined
cycle. The MS9001 is designed to burn a variety of
liquid and gaseous fuels.
MS9001E
Gas Turbine
13
GE Energy Gas Turbines