Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies a port by its type and number. If no interface is
specified, the command displays CDCP negotiation information for all ports with EVB enabled.
Examples
# Display CDCP negotiation information for all ports with EVB enabled.
<Sysname> display evb cdcp
---------------------------TwentyGigE 1/0/1---------------------
S-component capability
Supported S-Channel numbers per-port : Local-167/Remote-167
SVID range
SCID requested from remote
1, 2, 3, 4, 6, 10, 11, 12, 34, 35, 67
SCID/SVID pair list allocated
<1, 1>,
<10, 9>,
<67, 67>
Table 1 Command output
Field
S-component capability
Supported S-channel numbers per-port
SVID range
SCID requested from remote
SCID/SVID pair list allocated
display evb evb-tlv
Use display evb evb-tlv to display S-channel EVB TLV negotiation information.
Syntax
display evb evb-tlv [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
<2, 3>,
<3, 2>,
<11, 6>,
<12, 7>,
Description
Port-mapping S-VLAN component capability on the EVB bridge
and the EVB station.
S-channels supported by the EVB bridge and the EVB station.
SVID range on the EVB bridge.
SCIDs requested by the EVB station in ascending order.
List of (SCID, SVID) pairs allocated by the EVB bridge.
: Local-supported/Remote-supported
: 2-4094
:
:
<4, 5>,
<34, 23>,
2
<6, 4>,
<35, 35>,