Display Evb S-Channel - HP 6125XLG Command Reference Manual

Blade switch evb command reference
Table of Contents

Advertisement

Field
Remote RR status
Max ECP retry time
ULPPDU retransmission exponent
Resource wait-delay exponent
Reinit keep-alive exponent

display evb s-channel

Use display evb s-channel to display S-channel information.
Syntax
display evb s-channel [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies a port by its type and number. If no interface is
specified, the command displays S-channel information for all ports with EVB enabled.
Examples
# Display S-channel information for Twenty-GigabitEthernet 1/0/1.
<Sysname> display evb s-channel interface TwentyGigE 1/0/1
RR status: D -- Disabled, E -- Enabled
MAC learning: A -- Allowed, F -- Forbidden
S-Channel
interface
S-Channel1/0/1:1
S-Channel1/0/1:100
Description
Indicates whether the EVB station has enabled RR mode after EVB TLV
negotiation.
Maximum ECP retransmission times in this format: Local negotiation
value/Remote negotiation value/Operative value.
NA means no value is set on the remote EVB station.
ECP retransmission exponent in this format: Local negotiation
value/Remote negotiation value/Operative value.
NA means no value is set on the remote EVB station.
VDP resource-wait-delay exponent in this format: Local negotiation
value/Remote negotiation value/Operative value.
NA means no value is set on the remote EVB station.
VDP keepalive exponent in this format: Local negotiation value/Remote
negotiation value/Operative value.
NA means no value is set on the remote EVB station.
SVID
Uptime
yyyy/mm/dd hh:mm:ss
1
2012/12/17 03:43:13
100
2012/12/17 03:43:14
4
RR
MAC
status
learning
D
A
D
A
VSI
number
0
2

Advertisement

Table of Contents
loading

Table of Contents