VDP resource-wait-delay exponent
21
22
23
24
25
26
27
28
29
30
31
Examples
# Configure the VDP resource-wait-delay exponent for Twenty-GigabitEthernet 1/0/1 as 23.
<Sysname> system-view
[Sysname] interface TwentyGigE 1/0/1
[Sysname-TwentyGigE1/0/1] evb vdp timer resource-wait-delay exponent 23
evb vsi
Use evb vsi to create a VSI.
Use undo evb vsi to remove a VSI.
Syntax
evb vsi vsi-local-id { association | pre-association }
undo evb vsi vsi-local-id
Default
No VSI exists on an S-channel.
Views
S-channel interface view
Predefined user roles
network-admin
Parameters
vsi-local-id: Specifies a VSI local ID in the range of 0 to 1023.
association: Specifies the association property. On a VSI with the association property, all filters
immediately take effect.
pre-association: Specifies the pre-association property. On a VSI with the pre-association property,
VLAN filters take effect, but <VLAN, MAC> filters are not effective.
Calculated value (seconds)
20.97152
41.94304
83.88608
167.77216
335.54432
671.08864
1342.17728
2684.35456
5368.70912
10737.41824
21474.83648
16
Result value (seconds)
21
42
84
168
336
672
1343
2685
5369
10738
21475