HP 6125XLG Command Reference Manual page 12

SCH1/0/1:10.1
# Display brief information about VSI S-channel 1/0/1:10.1, and display the complete interface
description that you have configured. Assume that you have configured a description for the interface as
1234567890123456789012345678901234567890.
<Sysname> display interface s-channel 1/0/1:10.1 brief description
The brief information of interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Speed or Duplex: (a)/A - auto; H - half; F - full
Type: A - access; T - trunk; H - hybrid
Interface
SCH1/0/1:10.1
01234567890
Table 6 Command output
Field
S-Channel1/0/1:10 current state
Hardware Address
Description
PVID
Port link-type
Trunk port encapsulation
Last clearing of counters
Link
Duplex
Related commands
reset counters interface s-channel
UP -- --
Link Speed Duplex Type PVID Description
UP -- --
Description
Interface status:
•
Administratively DOWN—The interface is administratively
down.
•
DOWN—The interface is administratively up but physically
down.
•
UP—The interface is both administratively and physically
up.
Hardware address of the interface.
Description information for the interface.
Default VLAN ID of the interface.
Link type of the interface.
Encapsulation type of the trunk port.
Last time the reset counters interface command was executed
to clear interface statistics.
Never indicates interface statistics have never been cleared
since startup.
Physical connection status of an interface:
•
UP—The link is physically up.
•
DOWN—The link is physically down.
•
ADM—The link is administratively down.
•
Stby—A standby interface.
Duplex mode of an interface:
•
(a)/A—Autonegotiation.
•
H—Half-duplex.
•
F—Full-duplex.
9
-- -- 123456789012345678901234567
-- -- 12345678901234567890123456789