HP 6125XLG Command Reference Manual page 23

interface-number:channel-id.vsi-local-id: Specifies a VSI. The interface-number argument specifies an
S-channel by its port. The channel-id argument specifies the number of an S-channel. This S-channel ID
must exist. The vsi-local-id argument specifies the local number of a VSI. This VSI local ID must exist.
Usage guidelines
To collect traffic statistics for an S-channel interface or a VSI in a certain period, use this command
•
to clear existing statistics for the interface.
If no parameters are specified, the command clears statistics for all interfaces.
•
If only the s-channel keyword is specified, the command clears statistics for all created S-channel
•
interfaces and VSIs.
Examples
# Clear statistics for S-channel interface S-channel 1/0/1:10.
<Sysname> reset counters interface s-channel 1/0/1:10
# Clear statistics for VSI S-channel 1/0/1:10.1.
<Sysname> reset counters interface s-channel 1/0/1:10.1
Related commands
display interface s-channel
20