Configuring An Ipv6 Basic Acl - HP 6125G Configuration Manual

Step
1. Enter system view.
2. Create an IPv4
basic ACL and
enter its view.
3. Configure a
description for the
IPv4 basic ACL.
4. Set the rule
numbering step.
5. Create or edit a
rule.
6. Add or edit a rule
comment.
7. Add or edit a rule
range remark.
8. Enable counting
ACL rule matches
performed in
hardware.

Configuring an IPv6 basic ACL

Step
1. Enter system view.
2. Create an IPv6
basic ACL view
and enter its view.
3. Configure a
description for the
IPv6 basic ACL.
4. Set the rule
numbering step.
Command
system-view
acl number acl-number
[ name acl-name ]
[ match-order { auto |
config } ]
description text
step step-value
rule [ rule-id ] { deny |
permit } [ counting |
fragment | source
{ sour-addr sour-wildcard
| any } | time-range
time-range-name |
vpn-instance
vpn-instance-name ] *
rule rule-id comment text
rule [ rule-id ] remark text
hardware-count enable
Command
system-view
acl ipv6 number
acl6-number [ name
acl6-name ] [ match-order
{ auto | config } ]
description text
step step-value
5
Remarks
N/A
By default, no ACL exists.
IPv4 basic ACLs are numbered in the range of 2000 to
2999.
You can use the acl name acl-name command to enter
the view of a named IPv4 ACL.
Optional.
By default, an IPv4 basic ACL has no ACL description.
Optional.
The default setting is 5.
By default, an IPv4 basic ACL does not contain any rule.
If the ACL is for QoS traffic classification or packet
filtering, do not specify the vpn-instance keyword. This
keyword can cause ACL application failure. The
counting keyword (even if specified) does not take effect
for QoS policies.
Optional.
By default, no rule comments are configured.
Optional.
By default, no rule range remarks are configured.
Optional.
Disabled by default.
When the ACL is referenced by a QoS policy, this
command does not take effect.
Remarks
N/A
By default, no ACL exists.
IPv6 basic ACLs are numbered in the range of 2000
to 2999.
You can use the acl ipv6 name acl6-name command
to enter the view of a named IPv6 ACL.
Optional.
By default, an IPv6 basic ACL has no ACL
description.
Optional.
The default setting is 5.