Download Print this page

HP 6125G Configuration Manual: Configuring A Qos Policy; Overview; Defining A Class

Hp 6125g & 6125g/xg blade switches acl and qos configuration guide-r2103.
Hide thumbs


Configuring a QoS policy


A QoS policy is a set of class-behavior associations and defines the shaping, policing, or other QoS
actions to take on different classes of traffic.
A class is a set of match criteria for identifying traffic and it uses the AND or OR operator:
AND—A packet must match all the criteria to match the class.
OR—A packet matches the class if it matches any of the criteria in the class.
A traffic behavior defines a set of QoS actions to take on packets, such as priority marking and redirect.
By associating a traffic behavior with a class in a QoS policy, you apply the specific set of QoS actions
to the class of traffic.
Figure 5
shows how to configure a QoS policy.
Figure 5 QoS policy configuration procedure

Defining a class

To define a class, specify its name and then configure the match criteria in class view.


   Related Manuals for HP 6125G

This manual also for:

3600 v2 series

Comments to this Manuals

Symbols: 0
Latest comments: