Download Print this page

HP 6125G Configuration Manual: Displaying And Maintaining Aggregate Car Configuration; Aggregate Car Configuration Example; Network Requirements; Configuration Procedure

Hp 6125g & 6125g/xg blade switches acl and qos configuration guide-r2103.
Hide thumbs

Advertisement

Displaying and maintaining aggregate CAR
configuration
Task
Display statistics for aggregate
CAR actions.
Clear statistics for aggregate CAR
actions.

Aggregate CAR configuration example

Network requirements

As shown in
received on GigabitEthernet 1/0/1 using these parameters: CIR is 256 kbps, CBS is 2000 bytes, and
the action for red packets is discard.
Figure 21 Network diagram

Configuration procedure

# Configure an aggregate CAR according to the rate limit requirements.
<Sysname> system-view
[Sysname] qos car aggcar-1 aggregative cir 256 cbs 2000 red discard
# Create class 1 to match traffic of VLAN 10; create behavior 1, and reference the aggregate CAR in the
behavior.
Figure
21, configure an aggregate CAR to rate-limit the traffic of VLAN 10 and VLAN 100
Command
display qos car name [ car-name ]
[ | { begin | exclude | include }
regular-expression ]
reset qos car name [ car-name ]
63
Remarks
Available in any view
Available in user view

Advertisement

   Related Manuals for HP 6125G

This manual also for:

3600 v2 series

Comments to this Manuals

Symbols: 0
Latest comments: