Configuring aggregate CAR
Overview
An aggregate CAR action is created globally and can be directly applied to interfaces or referenced in
the traffic behaviors associated with different traffic classes to police multiple traffic flows as a whole. The
total rate of the traffic flows must conform to the traffic policing specifications set in the aggregate CAR
action.
Configuring aggregate CAR
Configuration restrictions and guidelines
In a traffic behavior, do not configure an aggregate CAR action together with any priority marking action
(including local precedence, drop precedence, 802.1p priority, DSCP value, and IP precedence marking
actions). Otherwise, you will fail to apply the QoS policy properly.
Configuration procedure
To configure aggregate CAR:
Step
1.
Enter system view.
2.
Configure an
aggregate CAR
action.
3.
Enter behavior view.
4.
Reference the
aggregate CAR in
the traffic behavior.
5.
Display the traffic
behavior
configuration
information.
6.
Display the
configuration and
statistics for the
specified aggregate
CAR.
Command
system-view
qos car car-name aggregative cir
committed-information-rate [ cbs
committed-burst-size [ ebs
excess-burst-size ] ] [ pir
peek-information-rate ] [ green
action ] [ yellow action ] [ red
action ]
traffic behavior behavior-name
car name car-name
display traffic behavior
user-defined [ behavior-name ]
[ | { begin | exclude | include }
regular-expression ]
display qos car name
[ car-name ] [ | { begin | exclude
| include } regular-expression ]
62
Remarks
N/A
N/A
N/A
N/A
Optional.
Available in any view
Optional.
Available in any view