Download Print this page

HP 6125G Configuration Manual: Configuring Sp+wfq Queuing; Configuration Example; Configuration Procedure

Hp 6125g & 6125g/xg blade switches acl and qos configuration guide-r2103.
Hide thumbs

Advertisement

Configuration example
Network requirements
Configure SP+WRR queue scheduling algorithm on GigabitEthernet 1/0/1, and use packet-based
WRR.
Configure queue 0, queue 1, queue 2, and queue 3 on GigabitEthernet 1/0/1 to be in SP queue
scheduling group.
Configure queue 4, queue 5, queue 6, and queue 7 on GigabitEthernet 1/0/1 to use WRR
queuing, with the weight 2, 4, 6, and 8, respectively.
Configuration procedure
# Enter system view.
<Sysname> system-view
# Enable the SP+WRR queue scheduling algorithm on GigabitEthernet1/0/1.
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos wrr weight
[Sysname-GigabitEthernet1/0/1] qos wrr 0 group sp
[Sysname-GigabitEthernet1/0/1] qos wrr 1 group sp
[Sysname-GigabitEthernet1/0/1] qos wrr 2 group sp
[Sysname-GigabitEthernet1/0/1] qos wrr 3 group sp
[Sysname-GigabitEthernet1/0/1] qos wrr 4 group 1 weight 2
[Sysname-GigabitEthernet1/0/1] qos wrr 5 group 1 weight 4
[Sysname-GigabitEthernet1/0/1] qos wrr 6 group 1 weight 6
[Sysname-GigabitEthernet1/0/1] qos wrr 7 group 1 weight 8

Configuring SP+WFQ queuing

Configuration procedure
To configure SP + WFQ queuing:
Step
1.
Enter system view.
2.
Enter interface view.
3.
Enable byte-count or
packet-based WFQ
queuing.
4.
Configure SP queue
scheduling.
5.
Configure the scheduling
weight for a queue.
Command
system-view
interface interface-type
interface-number
qos wfq [ byte-count | weight ]
qos wfq queue-id group sp
qos wfq queue-id group
group-id { weight |
byte-count } schedule-value
47
Remarks
N/A
N/A
By default, SP queuing is enabled.
By default, all the queues of a
WFQ-enabled port use are in the WFQ
group.
By default, the scheduling weight is 1 for
each queue of a WFQ-enabled port.

Advertisement

   Related Manuals for HP 6125G

This manual also for:

3600 v2 series

Comments to this Manuals

Symbols: 0
Latest comments: