Table of Contents
Advertisement
It is safer if you hold the computer with both hands horizontally as shown in
the below example.
Changing to the laptop mode
To change the operating mode to the Laptop Mode, follow the instructions
below.
1. Press the Display latch and raise the display to the upright position
carefully.
2. Rotate the display counter-clockwise slowly.
3. Turn the display latch toward you ready for the next closing of the
display.
Using the Fingerprint Sensor
This product has a fingerprint utility installed for the purpose of enrolling
and recognizing fingerprints. By enrolling the ID and password onto the
fingerprint authentication feature, it is no longer necessary to input the
password from the keyboard. Fingerprint feature enables you to:
■
Logon to Windows and access a security-enabled homepage through
IE (Internet Explorer).
■
Files and folders can be encrypted/decrypted and third party access to
them prevented.
■
Disable the password-protected screen-saver when returning from
power-saving (e.g., standby) mode.
■
Authentication of the User Password (and, if applicable, the HDD(Hard
Disk Drive) Password) when booting up the computer (Power-on
Security).
■
Single Sign-on feature
User's Manual
The computer is shaken horizontally.
Figure 4-13 Shake the computer
The computer is shaken perpendicularly.
Operating Basics
4-12
Advertisement
Chapters
Table of Contents
