Table of Contents
Advertisement
58
Getting Started
Using the computer in Tablet mode
(Sample Image) Holding the computer in Photography mode
Calibrating digital compass
If you have downloaded a compass application, to use this feature,
please note that the performance of any compass feature will vary
depending on environmental conditions. For example, any source
using electromagnetic or radio waves.
Before using any compass feature the compass needs to be
calibrated for accuracy. To calibrate, please disconnect the AC
adaptor and remove all peripheral/cables, and then horizontally
rotate the computer with the power on several times as shown in the
illustration below. Please note this is the most effective method of
calibrating this computer.
(Sample Image) Photography mode
Changing to Laptop mode
To use the computer as a normal laptop computer with its internal
keyboard:
1
Hold the computer with two hands on both the left and right
sides.
2
Slowly slide the display panel along the main body with two
hands.
Carefully slide the display panel out evenly from both sides without
excessive or sudden force.
Advertisement
Table of Contents
