Table of Contents
Advertisement
Power indicators
As shown in the above table, the Battery, 2nd battery, DC IN and Power
indicators on the system indicator alert you to the computer's operating
capability and battery charge status.
Battery indicator
Check the Battery indicator to determine the status of the main battery and
the 2nd battery indicator to determine the status of the Slice Expansion
battery. The following indicator lights indicate the battery status:
Flashing orange
Orange
Blue
No light
If the battery pack becomes too hot while it is being charged, the charge
will stop and the Battery indicator will go out. When the battery pack's
temperature falls to a normal range, charge will resume. This occurs
whether the computer's power is on or off.
DC IN indicator
Check the DC IN indicator to determine the power status with the AC
adaptor connected:
Blue
Flashing orange
No light
User's Manual
The battery charge is low. The AC adaptor must
be connected to recharge the battery.
Indicates the AC adaptor is connected and
charging the battery.
Indicates the AC adaptor is connected and the
battery is fully charged.
Under any other conditions, the indicator does
not light.
Indicates the AC adaptor is connected and
supplying proper power to the computer.
Indicates a problem with the power supply. Plug
the AC adaptor into another power outlet. If it still
does not operate properly, contact your dealer.
Under any other conditions, the indicator does not
light.
Power and Power-Up Modes
6-4
Advertisement
Chapters
Table of Contents
