Slice Expansion Battery - Toshiba Satellite R20 User Manual

Slice Expansion Battery

This battery pack increases your computer's operating time when a main
battery pack is also installed. For details on using the battery pack, follow
the steps below.
Connecting the Slice Expansion Battery
Follow the steps below to connect the Slice Expansion Battery to the
computer.
When handling Slice Expansion Battery, be careful not to short circuit the
terminals. Also do not drop, hit or otherwise apply impact; do not scratch or
break the casing and do not twist or bend the latches of it.
1. Be sure the computer's power is off and all cables are disconnected.
2. Lay the computer upside down.
3. Remove the protective cap from the Slice Expansion Battery.
4. Open the latches on the Slice Expansion Battery (1).
5. Fit the battery's tab into the groove on the underside of the computer
(2).
6. Connect the battery's connector to the docking port (3).
7. Close the latches to secure the Slice Expansion Battery to the computer
(4).
Latch
Disconnecting the Slice Expansion Battery
Follow the steps below to disconnect the Slice Expansion Battery to the
computer.
1. Save your work.
2. Turn the computer's power off. Make sure the Power indicator is off.
3. Remove all cables connected to the computer.
4. Lay the computer upside down.
5. Push the release latches in the direction of the arrows (1).
User's Manual
Figure 3-16 Securing the latches
Features, Utilities and Options
Latch
Tab
3-28