Changing To The Laptop Mode; Using The Usb Fdd Kit - Toshiba Portégé M200 User Manual

You can change the above sequence in the following procedure:
(1) Double click Change tablet and pen settings icon in the Task Bar.
(2) Click Change button in Display tab.
(3) Change the sequence in Orientation Sequence Settings screen. Click
OK button.
NOTE: You can set the orientation of the desktop screen just after
rotating the display from
[Start]-[All Programs]-[TOSHIBA]-[Tablet PC]-[TOSHIBA Rotation
Utility]

Changing to the laptop mode

To change the Tablet mode to the laptop mode, follow the instructions below.
1. Press the Display latch and raise the display to the upright position carefully.
2. Rotate the display counter-clockwise slowly.
3. Turn the display latch toward you for the next closing of the display.

Using the USB FDD Kit

A 3 1/2" diskette drive connects to the computer's USB port. It accommodates 1.44-
megabyte or 720-kilobyte diskettes. Refer to the
Introduction, for more information.
NOTE: The USB FDD Kit is an option with some models.
D - -
ISK IN USE
I
NDICATOR
D
ISKETTE SLOT
USB
CONNECTOR
Figure 4-13 The 3 1/2" USB FDD Kit

Changing to the laptop mode

Options section in Chapter 1,
E
JECT BUTTON
4-13